PERMANENTMARK® GLASS ENGRAVINGS AND UV-LACQUER ENGRAVINGS
In Europe over one million cars are stolen every year ! For over 15 years we have been introducing mark sets into the European market, enabling the car chassis number + reference of the country concerned to be engraved into all car windows. This has a preventive effect, since thieves and receivers of stolen property are obliged to replace all car windows.
|
 |
Practice shows, however, that glass engraving by itself is not always sufficient.
We recently succeeded in developing an unique Permanentmark® UV-lacquer paste.
The combination of glass engravings and UV-lacquer engravings appears to be just what we want. For, in case of theft, it is not only all the car windows that should be replaced, but the car should also be sanded and sprayed again.
FURTHER EXPLANATION GLASS ENGRAVINGS
Our Permanentmark® glass-engraving set enables you to etch the last 14 characters of your car chassis number (VIN number), provided with country reference “XX”, into all your car windows in no time. The result is matt white, clearly visible and indelible, but is is not annoying.
COUNTRY REFERENCE
Identification numbers are always placed AFTER the country reference. So, the country reference always indicates the country or origin.
A few examples of country references are:
Belgium |
BE |
Germany |
DE |
Denmark |
DK |
Spain |
ES |
Finland |
FI |
France |
FR |
United Kingdom |
GB |
Greece |
GR |
Ireland |
IE |
Italy |
IT |
The Netherlands |
NL |
Portugal |
PT |
Sweden |
SE |
Canada |
CA |
United States |
US |
The glass-engraving set includes very clear instructions for use. Even though you may be all fingers and thumbs, nothing can go wrong. {Note: over 700,000 car owners already preceded you with ordering glass-engravings sets.}
You stick the self-adhesive chassis-number templates on the windows, spread etch paste over them with the brush, have it work in for 30 seconds….. and: that’s it! All traces of your operation can be removed with a little water, but your chassis number can never be removed again..!
EXPLANATION UV-LACQUER ENGRAVINGS
(FIRST INTRODUCTION WORLDWIDE)
You can etch the last 14 characters of your car chassis number, provided with country reference, into the lacquer of your car with our Permanentmark® UV-lacquer engraving set in no time. The result is INVISIBLE, but absolutely indelible.
Your permanent, indelible chassis number can exclusively be seen under black light (UV-light). |
 |
The height of the marks is in reality 5.5 mm.
The colour of the marks is a blazing BLUE, irrespective of you car colour,
{Again, only to be seen under Black Light}
|
BLACK-LIGHT
|
|
The UV-lacquer engravings are NOT applied to the outside of your car.
They should be applied to uniform, fixed places on the inside of your car, for example, under the bonnet (hood), on thresholds, on the inside of the doors etc.
All details are clearly mentioned in the instructions attached.
HERE TOO, IT APPLIES THAT: If you are all fingers and thumbs, nothing can go wrong.
Applying UV-lacquer engravings is just as fast and simple as in case of your glass-engravings.
You stick the self-adhesive chassis-number templates on the indicated places on the lacquer of your car, you spread special UV-Permanentmark® paste on them, have it work in for 30 seconds….
and: that’s it! All traces of your operation can be removed with a little water, but your chassis number can never be removed again..!
RECOMMENDED BY THE POLICE
Police, Customs, Investigation Services as well as Research Companies etc. all of them dispose of professional Black-Light detection equipment.
The police throughout the world wholeheartedly recommend chassis engravings as a very effective weapon against the increasing number of car thefts.
A COMPLETE PERMANENTMARK® CAR-ETCH SET
* |
1) 28 (24 + 4 reserves) customised templates of the chassis number of your car, provided with your country reference. (If a car window has to be replaced once in a while in the future, then it will not be necessary for you to buy a new car-etch set, for you will receive 4 reserve templates and the glass-etch paste can be kept for an unlimited period of time.) |
For glass engraving: a complete glass-engraving set consisting of:
* |
instructions for use |
| * |
a brush |
| * |
Permanentmark® glass-set paste |
| * |
two high-quality special vinyl warning stickers (to be stuck on the inside/to be read from the outside). |
For lacquer engraving:
* |
a complete UV-lacquer-engraving set consisting of instructions for use |
| * |
a brush and |
| * |
Permanentmark® UV-lacquer-engravings paste. |
TEMPORARY INTRODUCTORY ACTION
During the first-time introduction, you only pay € 39.65 for a complete Permanentmark® car-ectch set as described above.
In addition, you will (temporarily) receive, together with your engraving set, a special FREE key ring provided with Black-Light illumination (inclusive of batteries). Besides using it as a normal key ring, you can also illuminate your UV-lacquer engravings yourself and see them clearly.
|