How to apply

How to apply

Etching/engraving with colored paste

Follow this instruction for applying red, blue or UV marking.

Important

The paste contained in this pack is toxic. Keep the paste out of the reach of children. Do not eat, drink or smoke while working with the paste. Keep the bottles with paste in a cool place, preferably locked. Templates, bottles and brushes should be disposed of carefully after use. (chemo waste bin) If paste comes into contact with your skin, wash it away as soon as possible with soap and warm water!

Good to know

  • The brand paste can be used on almost all types of plastic
  • The brand paste can be used on painted / sprayed / stoved surfaces
  • The paste does not work on bare metals

This is how the coding is applied

1. First check whether the CORRECT identification data has been punched in the strips (templates).
2. Thoroughly clean and grease the places where the identification data should be placed.
  • Make the surface grease-free with the alcohol prep pad
3. Apply Templates
  • Remove the white backing from the first template.
  • Paste the template in your preferred location
  • Press the template firmly.

tip: The better the template is pressed, the better the result will be.

4. Apply Brand Paste
  • Shake the bottle before use
  • Open the glass bottle with branded paste and dip the brush in the paste
  • Carefully spread the etching paste over all numbers and letters of the identification data
  • Just be careful not to spill over the strips.
  • Let the paste work for about 15 minutes

Attention: DO NOT TOUCH THE TICKETS: they will stay wet for about 30 minutes

5. Remove the labels
  • not with a hard sharp object, but eg with the nail of your thumb.
6. Remove marks with water
  • Take a bucket with water and a sponge or cloth, and wipe away the remaining paste (dots)
7. Apply the transparent vinyl stickers over the applied identification data

Your markings can no longer be removed.

UV marks are only visible under black light.

Etching/engraving with white paste

Follow this instruction to apply white marking

Important

The paste contained in this package is poisonous. Keep the paste out of the reach of children. Do not eat, drink or smoke while working with the paste. Keep the bottles with paste in a cool place, preferably locked. Templates, bottles and brushes should be disposed of carefully after use. (chemo waste bin) If paste comes into contact with your skin, wash it away as soon as possible with soap and warm water!

This is how the identification is applied

1. First check whether the CORRECT identification data has been punched in the strips (templates).
2. Thoroughly clean and grease the places where the identification data should be placed.
  • Make the surface grease-free with the alcohol prep pad
3. Apply Templates
  • Remove the white backing from the template.
  • Paste the template where you want it
  • Press the template firmly.

tip: The better the template is pressed, the better the result will be.

4. Apply branding paste
  • Open the glass bottle with branded paste and dip the brush in the paste
  • Carefully spread the etching paste over all numbers and letters of the identification data
  • Just be careful not to spill over the strips.
  • Let the paste work for about 15 minutes

Attention: DO NOT TOUCH THE TICKETS: they will stay wet for about 30 minutes

5. Remove the labels
  • not with a hard sharp object, but eg with the nail of your thumb.
6. Remove marks with water
  • Take a bucket with water and a sponge or cloth, and wipe away the remaining paste (dots)

you will see your identification data neatly placed, indelible and deterrent to any thieves.

Apply warning stickers

Follow this instruction for applying the warning stickers

These stickers, size 50 x 70 mm, are intended for office spaces in your company location(s).

Apply outside / read outside. This way, potential thieves are informed at an early stage that your properties are marked with Permanentmark.

Vehicle etching/engraving with UV etching paste

Follow this instruction for applying UV marking to painted surfaces

Important

The UV branding paste contained in this kit is toxic. Keep the paste out of the reach of children. Do not eat, drink or smoke while working with the paste. Avoid contact with the skin. If a splash does get on the skin, rinse it off immediately with plenty of cold water.

We recommend that you apply the UV varnish engravings in the following places

  • On the underside of the hood, in the middle, on the inside of the hood, on the paint
  • In the engine compartment left and right on the paint where the shock absorbers are attached or on the paint of the mudguards.
  • On the underside of the boot lid, in the middle, on the inside of the boot lid, on the paintwork.
  • On the inside of the door, on the paint, near the lock. You do this at every doorman.

All UV lacquer engravings are applied to the paint on the inside of the vehicle.

ATTENTION!!!

The UV brand paste may only be applied to the ORIGINAL FACTORY PAINT of your car!

HOW THE UV LACQUER ENGRAVING ARE APPLIED

1. First check whether the CORRECT identification data has been punched in the strips (templates).
2. Thoroughly clean and degrease the places where the identification data must be placed.
  • use the alcohol prep to degrease the surface
3. Apply Templates
  • Remove the white backing from the first template.
  • Now paste the template in the webed location
  • Press the template firmly.

tip: The better the stencil is pressed, the better the result will be.

4. Apply Brand Paste
  • Open the glass bottle with branded paste and dip the brush in the paste
  • Carefully spread the etching paste over all numbers and letters of the identification data
  • Just be careful not to spill over the strips.
  • Let the paste work for about 15 minutes

Attention: DO NOT TOUCH THE TICKETS: they will stay wet for about 30 minutes

5. Remove the labels
  • not with a hard sharp object, but eg with the nail of your thumb.
6. Remove marks with water
  • Take a bucket with water and a sponge or cloth, and wipe away the remaining paste (dots)

Your UV markings can no longer be removed from the vehicle.

They are only visible under black light.

Etching/engraving acrylic windows

Follow this instruction for applying colored marking (red, blue or UV) to plastic (Acrylic) windows.

Important

The paste contained in this package is poisonous. Keep the paste out of the reach of children. Do not eat, drink or smoke while working with the paste. Keep the bottles with paste in a cool place, preferably locked. Templates, bottles and brushes should be disposed of carefully after use. (chemo waste bin) If paste comes into contact with your skin, wash it away as soon as possible with soap and warm water!

This is how the identification is applied in the windows

(>>>ON THE OUTSIDE<<<)

1. First check whether the CORRECT identification data has been punched in the strips (templates).
2. Thoroughly clean and grease the places where the identification data should be placed.
  • Make the surface grease-free with the alcohol prep pad
  • In the rear window the corner that can be seen from the sidewalk
  • In the side windows, the corners near the door locks.
3. Apply Templates
  • Remove the white backing from the first template.
  • Now stick the template on the window.
  • Press the template firmly.

tip: The better the template is pressed, the better the result will be.

4. Apply branding paste
  • Open the glass bottle with branded paste and dip the brush in the paste
  • Carefully spread the etching paste over all numbers and letters of the identification data
  • Just be careful not to spill over the strips.
  • Leave the paste to work for about 15 minutes

Note: DO NOT TOUCH THE TICKETS: they will stay wet for about 30 minutes

5. Remove the labels from the windows
  • not with a hard sharp object, but eg with the nail of your thumb.
6. Remove marks with water
  • Take a bucket with water and a sponge or cloth, and wipe away the remaining paste (dots)

you will see your identification data neatly written in the windows, indelible and deterrent to would-be thieves.

Etching/engraving glass windows

Follow this instruction for etching glass

Important

The etching paste contained in this set is poisonous. So don’t let children play with it! Avoid contact with the skin. If a splash does get on the skin, rinse it off immediately with plenty of cold water. Also avoid inhaling the fumes of the etching paste. Etching should therefore be done outdoors, not in the sun, but also not in the rain. In both cases, the etching paste may flow out.

This is how the identification is applied in the windows

(>>>ON THE OUTSIDE<<<)

1. First check whether the CORRECT identification data has been punched in the strips (templates).
2. Get a bucket and a sponge and fill the bucket with water
3. Thoroughly clean the places where the identification data should be placed and remove any grease.
  • In the windscreen, we recommend the outermost corner of the steering wheel.
  • In the rear window the corner that can be seen from the sidewalk
  • In the side windows, the corners near the door locks.
4. Apply Templates
  • Remove the white backing from the first template.
  • Now stick the template on the glass.
  • Press the template firmly.

tip: The better the template is pressed, the better the result will be.

5. Apply Etching Paste
  • To do this, put the car outside, but not in the sun and not in the rain.
  • Now open the bottle with glass etching paste, dip the brush in
  • Carefully spread the etching paste over all numbers and letters of the identification data
  • Just be careful not to spill over the strips.
  • Let the paste work for about 2 minutes
6. Remove the templates from the windows
  • not with a hard sharp object, but eg with the nail of your thumb.
7. Remove the etching paste
  • Wet the sponge with water and rinse away the paste
  • Rinse until all the paste has disappeared from the windows

FYI: The etching paste is absolutely not harmful to the rubber or body of your car!

you will see your identification data neatly etched into the windows, indelible and a deterrent to would-be thieves.

APPLY WARNING STICKERS

These 2 stickers are intended for the INSIDE of your car windows.

We recommend that you place the stickers on the inside of the windows of both front doors of your car, ± ½ centimeter above the etched identification data.

You can also place the stickers on the inside of the windshield and rear window of your car, ± ½ centimeter above the etched identification data.